Monitoring Parameters - Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual

Monitoring Functions
7-1-3

Monitoring Parameters

Description
Monitoring Using the Network Configurator
206
The I/O status of an NE1A-series or NE0A-series Controller or DST1-series
Safety I/O Terminal can be monitored using the Network Configurator. If the
configuration fails or if an error occurs in any I/O, monitoring this information
enables the user to determine the cause of the error.
The user can monitor the parameters using any of the following methods:
1. Select a device and select Device – Monitor from the menu bar. Click the
Parameters Tab in the displayed window.
2. Select a device and click the Monitor Device Button on the toolbar. Click
the Parameters Tab in the displayed window.
3. Right-click a device and select Monitor from the pop-up menu. Click the
Parameters Tab in the displayed window.
Section 7-1