Omron DEVICENET SAFETY - SYSTEM CONFIGURATION 07-2009 System Configuration Manual page 221

Programming
Exporting User-defined Function Blocks
Note
Distributing User-defined Function Block Files
Importing User-defined Function Blocks
Note
A user-defined function block can be exported (i.e., saved as a user-defined
function block file).
1. Click the saved user-defined function block in the Logic Editor Object List
to select it.
2. Select Function Block – Export from the Logic Editor main menu.
The Save As Dialog Box will be displayed.
3. Enter the file name and click the Save Button.
The user-defined function block will be saved in a user-defined function
block file (*.fbd).
Select Function Block – Batch Export to export all user-defined function
blocks in a group.
Once the file has been exported, move the saved file to the personal comput-
ers on which it is to be reused.
A user-defined function block must first be imported before it can be used in a
program.
1. Use the Network Configurator to allocate a new NE1A-series Controller to
the network and open the Logic Editor.
2. Select Function Block – Import from the Logic Editor main menu.
The Open File Dialog Box will be displayed.
Multiple files can be imported simultaneously by selecting them in the Open
File Dialog Box.
Section 6-3
187