Omron CP1H Brochure page 8

Reduce development time
with efficient tools
• Plug-and-play USB Connection
Just install the CX-Programmer (Ver. 6.1 or higher) and connect
the USB cable to the CP1H. The driver will be installed
automatically.
Personal
computer
CX-One
A Wealth of Instructions
• PID Instruction with Autotuning
PID constants can be automatically tuned for the PID
instruction. The limit cycle method is used for tuning, allowing
tuning to be completed quickly.
• Floating-point Decimal Instructions, Trigonometric
Instructions, and More.
Just like the CS/CJ-series PLCs, the CP1H has approximately
400 instructions for ladder programming.
The Structured Text (ST) Language Makes
Arithmetic Operations Even Easier
In addition to ladder programming, function block logic can
be written in ST language, which conforms to IEC 61131-3.
Arithmetic processing is also possible with ST, including
processing of absolute values, square roots, logarithms, and
trigonometric functions (SIN, COS, and TAN). Processing that is
difficult to write in ladder programming becomes easy using
structured text.
8
• A Built-in USB Port (USB 1.1, Type B) Enables a Personal
Computer to Be Connected using a standard USB cable.
Standard A-type male to B-type
male USB cables can be used.
Modular PLCs
CJ Series
Common
Architectures
Compact PLCs
CP Series
Note: Programming Consoles
(e.g., CQM1H-PRO01 and C200H-PRO27)
cannot be used with the CP1H.
Rack-based PLCs
CS Series