Parkside PWS 1100 Manual page 7

•* For polishing plastics use a felt polishing disc
wheel to setting 1.
•* For removing paint from metal use an appropriate abrasive disc
to setting 2-3.
•* For grinding metal and stone use an appropriate grinding disc
to setting 4-6.
•* For rough grinding metals use an appropriate roughing disc
•* = These are advisory recommendations only. Before you start work, you should carry out a test to see which speed is most suitable for your work.
1 = These accessories are not supplied with the angle grinder.
Further practical tips for power tools can be found in the accompanying booklet on safety advice.
We reserve the right to make technical modifications in the course of further development.
STATEMENT OF CONFORMITY
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, hereby declare that this product conforms
with the following EC regulations:
EC low voltage regulations:
Electromagnetic compatibility:
Applicable harmonised standards:
Manufacturer:
Model type:
Description:
Bochum, 30.09.2002
Hans Kompernaß
- Managing Director -
1 . For polishing metals use a buffing disc
1 . Select a slow to medium speed – turn the speed control wheel
1 . Select a medium to high speed – turn the speed control wheel
1 . Select a high speed – turn the speed control wheel
(98/37 EEC)
(73/23/EEC), (93/68 EEC)
(89/336 EEC),
EN 50144-1:1998; DIN VDE 0740 Teil 21:1994
EN 55014-1:1993 +A1 +A2;
EN 61000-3-2:1995 +A1 +A2; EN 61000-3-3:1995
EN 55014-2:1997
PARKSIDE
PWS 1100
ANGLE GRINDER
7
1 . Select a slow speed – turn the speed control
to setting 6.