For grinding, roughing, cutting and polishing Dear Customer! Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools correctly. Please read the operating instructions...
• Check that the speed stated on the grinding disc is greater than or equal to the grinder's nominal speed. • Make sure that the size of the disc is suitable for use with the angle grinder and that the disc fits correctly on to the clamping flange .
• When working on inclined surfaces, do not press the grinder on to the workpiece with too much force. If the speed drastically reduces, do not press on as hard and that will ensure you work safely and effectively. If the grinder is brought to a sudden halt or jams, switch off the power immediately.
Page 7
6. •* = These are advisory recommendations only. Before you start work, you should carry out a test to see which speed is most suitable for your work. = These accessories are not supplied with the angle grinder.
WARRANTY This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address.