Sennheiser S-MCD 3000 HP - V1.2 Instructions For Use Manual page 71

RF Level Recorder
The recording range is specified over a time axis. The minimum recording duration is 10 seconds
and the maximum recording duration 2 hours. The range is specified via the "Scaling" button.
If you alter the time frame, all previously recorded data are lost. If you have not stored the data, a
message notifies you of the loss of the data and you can cancel the transaction.
RF Level Recorder
The recording range is specified via a defined frequency range. The minimum starting frequency
is 140 MHz up to a maximum final frequency of 999 MHz. The range is specified via the "Scaling"
button.
If you alter the frequency range, all previously recorded data are lost. If you have not stored the
data, a message notifies you of the loss of the data and you can cancel the transaction.
Receiver address
The selection list "Receiver address" allows you to select a receiver in order to carry out a
measurement. The RF recorder detects all connected receivers and shows their address in the
selection list.
71