Starting The Production - Sennheiser S-MCD 3000 HP - V1.2 Instructions For Use Manual

17 Starting the production

Click onto this button to change to the "Production" mode.
NOTE
This is the only mode in which a transmission between PC and receiver is possible.
Now click onto this button to start the production.
The production begins with the first scene.
This button takes you to the next scene.
This button takes you to the previous scene.
The production is halted using this button.
It is necessary to halt the production before you can
make further alterations to the scenes or the control panels.
You can also carry out the above functions via commands in the menu bar.
Here you can also select scenes directly via the "Go to Scene" command.
68