Specifying The System Addresses - Sennheiser S-MCD 3000 HP - V1.2 Instructions For Use Manual

5 Specifying the system addresses

The receivers are factory-set to a standard address. When the receivers have been installed, particular
addresses must be allocated to the receivers in question.
When the SMCD program is called up for the first time, the message "Multiple Receiver Addresses"
appears. However, for the purposes of perfect functioning, a special address must be allocated to each
receiver.
The function "System Addresses" from the Options menu takes you to the "System Addresses" dialog.
There you can set the receiver addresses manually or automatically.
53