Editing The Reception/Transmission Characteristics - Sennheiser S-MCD 3000 HP - V1.2 Instructions For Use Manual

11 Editing the reception / transmission characteristics
Click onto this button for the "Production" mode and start the production.
Open the editing window "Receiver Configuration" by double-clicking onto the panel which you would
like to edit. You will see the following window:
1 General settings
Squelch control:
The "Squelch" control allows you to set the squelch level. This is indicated in the RF level display
on the right-hand margin as a yellow bar.
You can read off the deviation level from the right-hand display.
You can read off the battery status from the bottom display.
61