Sennheiser HDI 302 Instructions For Use Manual page 44

SPECIAL CONNECTIONS ON THE
RI 250-S AND RI 250-J RECEIVERS:
HEADPHONE CONNECTION ON THE RI 250-S / RI 250-J
The receiver features a headphone socket (3.5 mm Ø jack) for connecting a
Sennheiser headphone.
CONNECTING AN INDUCTION LOOP:
The receiver features the jack socket also for connecting an EZT 1011 induction
loop. The EZT 1011 inductively transmits the audio signal from the receiver
to your hearing aid.
NOTES
When you connect the induction loop, the headphone systems at the RI 250-J
are automatically switched off.
Please first check whether your hearing aid is designed for use with
an induction loop.
Alternatively, the EZI 120 induction coupler can be connected by
means of the KA-1K connection cable.
Your Sennheiser dealer will be happy to provide you with information
on binaural solutions.
19