Putting The Receiver Into Operation; Connecting The Antennas; Mounting The Receiver Into A Camcorder - Sennheiser EK 3241 - 08-06 Instructions For Use Manual

Putting the receiver into
operation

Connecting the antennas

The receiver is supplied with two antennas which are
necessary for true diversity operation (see "Diversity
reception" on page 22).

Mounting the receiver into a camcorder

The receiver can be inserted into the slot-in facility of most
professional camcorders. Suitable mounting kits are avail-
able as accessories from your Sennheiser partner.
Mounting kits are available for the following camcorder
types (see "Accessories" on page 23):
Camcorder
Sony
Ikegami, Panasonic
Thomson
A mounting kit consists of:
1 sub-D adapter
1 mounting frame
Screws
By way of example of an Ikegami or Panasonic camcorder,
the following describes how to insert the receiver into the
camcorder's integrated receiver slot:
6
Connect the antennas to the
antenna sockets
Screw the antennas tight.
Mounting kit
GA 3041-15 (15-pin)
GA 3041-25 (25-pin)
GA 3041-44 (44-pin)
Secure the sub-D adapter
the bottom of the receiver
using two screws
and .
to
.