Table of Contents
Advertisement
ITC222-EN
17/07/03
16:59
Operation
Setting the time
Return
‹ Sleep timer
Clock reference programme
Time and date
Wake-up timer
Wake-up time
Switch on for
Programme number
EN
Daily
Setting the time
1.
Select the Clock reference programme option.
2.
Select a channel with Teletext which can provide the time to be used as a reference using the
channel number using the numeric buttons on the remote control.The time is displayed after a few seconds if it is
available on the selected channel.
If the time is not provided by Teletext the Wake-up timer function is not available and a message prompts you to
change reference channel or enter the time manually.You do this by selecting the Time and date option and entering
the time using the numeric buttons or the
Note: if the power supply is disrupted (i.e. the set is switched off using the on/off button or unplugged, or there is an electrical fault), the time will
disappear if it has been entered manually.You must reset it. We therefore recommend you find the time on a channel and check that it is correct.
Once the time has been set you can use the Wake up timer function.
Programming the sleep timer
1.
Select the Sleep timer option.
2.
Set an automatic shut-off time (from 0 to 4 hours in 5-minute intervals) by using the
to disable this function.
When the sleep timer is on, a message appears one minute before the television set goes into standby mode. Press any
button on the remote control to cancel standby mode.
Programming the wake-up timer
This function can be used to set the time for the set to come on, for instance, for the television to wake you up.
1.
Select the Wake up timer option and press
the relevant options.
2.
Under the Wake up time option enter the wake-up time using the numeric or
3.
Under the Switch on for option, use the
intervals of 5 minutes).
4.
Under the Programme number option enter the number of the channel you want to wake you using the
numeric buttons.You can also select an AV programme using the
equipment connected to the AV socket to come on as well.
5.
For a daily wake-up check the box for the Daily option by pressing
6.
Press
to close the menu.
EXIT
7.
Put the TV set into standby mode using the
The TV set will automatically switch on at the programmed time and for the programmed duration if you do not interrupt it
by using the remote control.
Page 16
The TIME menu can be used to set the time on the TV set and program
the automatic sleep timer or wake-up timer functions.
00:15
02
Display the OVERVIEW menu by pressing the
12:34 03/03/03
Time option and press
07:00
01:00
10 CNN
buttons.
OK
buttons to set the period of time (from 5 minutes to 4 hours in
button on the remote control.
to confirm.
OK
to check the box, which enables this function and provides access to
button. In this case, make sure you programme the
AV
.
OK
16
button. Select the
MENU
buttons, or enter a
buttons. Set the time to 00:00
buttons.
or
Advertisement
Table of Contents
