Automatic Channel Set-Up; Intelligent Channel Set-Up; Manual Channel Set-Up; Fine Tuning A Channel - THOMSON T32E53U Manual

Automatic Channel Set-up

Channel set-up involves selecting all the settings required
to be able to search for and store all the channels you can
receive. Make sure that the television is switched on and
follow all the steps in turn specified hereafter.
Display the menu by pressing the Menu button. Press the
left or right direction button to select the Channel icon
and press the up or down direction or OK button to enter
the Channel menu.
1. Press the up or down direction button to select
Auto Tuning option.
2. Press the right direction or OK button to start channel
search.
Note: Depending on the number of channels you
receive, it may take several minutes for the channel
search to finish. If you want to interrupt the process,
press the Menu button. The channels already found
will be stored.
3. Channels are arranged in a pre-set order. Refer to the
following sections if you want to fine tune or skip a
channel, or swap two channels.

Intelligent Channel Set-up

This operation will keep all the existing channels and add
newly found channels to the end of the channel list.
1. Activate the Channel menu and p
direction button to select
2. Press the right direction or OK button to start intelligent
tuning.
Note: If you want to interrupt the process, press the
Menu button. The channels already found will be
stored.

Manual Channel Set-up

Follow the below procedure if you find that some channels
have not been stored after the automatic set-up as well
as the intelligent set-up.
Manual Tuning
Channel
Band
Frequence
Search
'MENU' TO RETURN.
Channel
Auto Tuning
Intelligent Tuning
Manual Tuning
Fine-Tune
42.25 MHz
Sound System DK

Channel Edit

the
ress the up or down
the Intelligent Tuning option.
1
VHFL
49.70 MHz
'EXIT' TO EXIT.
General Operation
1. Activate the Channel menu and p
direction button to select
2. Press the right direction or OK button to enter the
Manual Tuning menu.
3. Select the Channel option and press the
direction button to select a channel number to store the
channel that will be found.
4. If necessary, press the up or down direction button to
select the Band option and
button to toggle among VHFH, UHF and VHFL.
5. Press the up or down direction button to select
Frequence option and press the
button to search manually.
6. Press Menu to return or Exit to close the menu.

Fine Tuning a Channel

If the picture is not clear you can fine tune the channel.
1. Activate the Channel menu and p
down direction button to select
2. Press the left or right direction button to fine tuning
3. Press Menu to return or Exit to close the menu.

Setting the Sound System

1. Activate the Channel menu and p
direction button to select
2. Press the right direction or OK button to display the
selectable options.
3. Press the up or down direction button to
appropriate sound system: DK, BG, I and M.
4 Press Menu to return or Exit to close the menu. .
Channel Edit
You can use this function to skip a channel or swap two
channels.
1. Activate the Channel menu and p
direction button to select
2. Press the right direction or OK button to enter the
Channel Edit menu.
Channel Edit
Current Channel
Target Channel.
Skip
Swap
'MENU' TO RETURN.
8
ress the up or down
the Manual Tuning option.
left or right
press the left or right direction
the
left or right direction
ress the up or
the Fine-Tune option.
ress the up or down
the Sound System option.
select an
ress the up or down
the Channel Edit option.
1
1
Yes
?
'EXIT' TO EXIT.