Table of Contents
Advertisement
ITC222-EN
17/07/03
16:59
Customizing your television
Preferences
Return
Permanent pr. number
‹ Language
Country
Maximum TV volume
Visual effect
Program Info ref. pages
Select your language using the ¦/‹ keys.
Permanent pr. number : check this box using the
being watched.
Language : select from the list the language the menus will be displayed in using the
Country : select the country to ensure that characters display correctly in Teletext.
Maximum TV volume : set the maximum volume level using the
press the
button and hold it for a few seconds.
OK
Visual effect : whenever this function is enabled when the television is switched on, the picture is displayed from the
middle of the screen.The reverse effect occurs when the television is switched off (in full screen TV mode only).
Note: This feature is automatically enabled. To disable it, uncheck the box.
Program Info ref. pages : if you have changed reference page for the TV channels in Teletext you can restore the factory-
set reference pages by pressing the
Press
to close the menu. Select the option Return and press
EXIT
Configuring AV sockets
Return
‹ AV1 name
AV1 video input
AV2 name
AV2 video input
AV3 name
AV3 video input
Select the name of the device
connected to AV1.
AV1 name : Use the
factory preset names do not suit you, select AV1__ and enter another one, following the screen messages.
AV1 video input : use the
connected to the AV1 socket.
RGB
Note: Select
if no picture is displayed when you connect a games console.
Repeat the above procedure to configure the AV2 and AV3 sockets.
AV4 name : enter the name of the equipment connected to this socket.
Note: this option is only displayed if your equipment has a synchro scan socket.
Press
to close the menu. Select the option Return and press
EXIT
Page 19
You can set preferences for some features. These preferences remain in
force as long as you do not change them.
Press the
English...
UK...
Installation option and confirm by pressing
from the Install menu and press
Reset...
The Preferences menu offers the following options:
button for about five seconds until Done appears.
OK
You can configure your TV set according to the equipment you connect
to it.
DECOD.
Display the OVERVIEW menu using the
RGB...
Installation option and press
VCR1
S-Video...
Select the AV settings option and press
CAMCOR
Follow the messages on screen and the instructions below explaining
Video...
how to configure the AV sockets.
buttons to select from the list the name of the equipment connected to this socket. If the
buttons to select from the list the type of video signal transmitted by the equipment
button to display the OVERVIEW menu. Select the
MENU
OK
button to permanently display the number of the programme
OK
buttons.To hear the level that you have just set,
to return to the Install menu.
OK
OK
to return to the Install menu.
OK
19
Operation
. Select Preferences
OK
to confirm.
buttons.
button. Select the
MENU
to confirm.The Install menu appears.
to confirm.
OK
EN
Advertisement
Table of Contents
