Table of Contents
Advertisement
ITC222-EN
17/07/03
16:59
Operation
Graphic equaliser
Return
Sound preset
EN
‹ Frequency range
Frequency range : the graphic equaliser has five frequency bands. Select each band in turn using the
make the necessary adjustments using the
Note: When you are setting the graphical equaliser,
Press
to close the menu.To return to the Sound menu, select Return and press
EXIT
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories.
Adjusting the picture
Return
Advanced use
Picture preset
‹ Brightness
Colour
Contrast
Contrast expand
Sharpness
Auto noise reduction
menu (see further below).
Picture preset : use the
Personal contains the values you have defined for the settings Brightness , Colour , Contrast and Sharpness .
You can access the list of preset picture settings directly by pressing the red button on the remote control, selecting the
Picture preset option and choosing one of the preset parameters from the list.Your selection is applied to all channels.
You must, however, select a preset parameter for each AV programme.
Note : This function is not available in PIP
Brightness , Colour , Contrast , Sharpness : adjust these settings as required.
Note: These settings are automatically stored under
Contrast expand : can be used to adjust the picture according to the ambient brightness. Select an option from the list
using the
buttons.
Auto noise reduction : improves the quality of the picture in the case of poor reception. Select an option from the list
using the
buttons.
Note: This function is only available for certain audio-visual sources.
Return
‹ Brightness
Colour
Contrast
Tone
Page 14
Select Graphic equaliser from the Sound menu and press
display the menu.This menu is used to select a preset parameter and
define your own settings using the graphic equaliser. It offers the
Film...
following options:
Sound preset : use the
for the programme you are watching.
The Personal setting stores your graphic equaliser settings.
You can access the list of preset sound settings directly by pressing the
red button on the remote control, selecting the Sound preset option
Treble (10 kHz)...
and choosing one of the preset parameters from the list.Your selection is
applied to all channels and AV programmes.
buttons. Press
Personal
The menus for adjusting the picture are used to obtain the best picture
setting according to your preference, the type of programme you are
watching and the ambient lighting.When you make an adjustment only
...
the selected option remains displayed, allowing you to see the changes
Personal...
taking place on screen. The entire menu is displayed again when you
select another option or the time for making an adjustment has elapsed.
Display the OVERVIEW menu using the
Medium...
and press
options:
Low...
Advanced use : this option provides access to the Advanced use
buttons to select the appropriate setting for the programme you are watching.
Split screen
mode.
Personal
Some menu options are not available in PIP Split screen mode (see
opposite).
Press
select Return and press
Warm...
buttons to select the appropriate setting
to confirm.
OK
Sound preset
appears under the
to confirm.The Picture menu appears with the following
OK
under the
Picture preset
option.
to close the menu.To return to the OVERVIEW menu,
EXIT
to confirm.
OK
14
OK
buttons and
option.
to confirm.
OK
button. Select Picture
MENU
to
Advertisement
Table of Contents
