Mounting - Smeg SI3842B Manual

8.3 Mounting

8.3.1 Over empty kitchen unit or drawers
If there are other pieces of furniture (lateral walls,
drawers, etc.) under the hob, a double-layer
wooden base must be installed at least 30 mm from
the bottom of the hob to avoid any accidental
contact. It must only be possible to remove the
double-layer base using suitable equipment.
opens on bottom
8.3.2 Over built-in oven
If installed on top of an oven, the latter must be equipped with a cooling fan.
The distance between the induction hob and the kitchen furniture or other built-in appliances must be
enough to ensure sufficient ventilation and air discharge.
Remove the front transverse strip (if necessary) on the unit to create an opening for the air flow of at
least 4 mm under the work surface across the full width of the appliance.
In any event, if installed above an oven, a dishwasher or a fridge, a space of at least 5 cm must be left
between the hob and the top of the appliance installed below.
opens only on bottom
46
Instructions for the installer
opens on rear
opens on bottom and on rear