Table of Contents
Advertisement
Instructions for the user
9. EXTRAORDINARY MAINTENANCE
The oven requires periodic minor maintenance or replacement of parts subject
to wear, such as gaskets, light bulbs, etc. Specific instructions for each
operation of this kind are given below.
Before any intervention that requires access to live parts, disconnect the
appliance from the power supply.
If a problem cannot be resolved through ordinary maintenance or in the case of
other types of fault, contact your local technical support centre.
9.1
Replacing the light bulb
If a light bulb needs to be replaced because it is
worn or burnt out, remove the guide frames;
see "8.5.1 Removing guide frames".
Then remove the bulb cover using a tool (e.g. a
screwdriver).
Remove the bulb by sliding it out as shown.
On some models only: the bulbs are halogen
bulbs, so do not touch them directly with
your fingers, wrap them in insulating material.
Replace the bulb with one of the same type
(40W). Replace the cover correctly, so that the
moulded part of the glass is facing the door.
Press the cover down as far as it will go so that it attaches completely to the
bulb support.
75
Advertisement
Table of Contents
