Instructions for the user
Removing the internal glass panel:
•
Remove the internal glass panel by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (1).
•
Then pull the front of the glass panel
upwards (2).
•
Doing this detaches the 4 pins attached to
the glass from their slots in the oven door.
Removing the middle glass panels:
(pyrolytic models)
•
There are two middle glass panels in
pyrolytic models, attached using 4 small
locks. Remove the middle panes by lifting
them upwards.
(Multifunction models)
•
An intermediate glass panel may be
present on multifunction models; if so,
remove it by lifting it upwards.
Cleaning:
•
Now it is possible to clean the external
glass panel and the panels removed
previously. Use absorbent kitchen roll. In
the case of stubborn dirt, wash with a
damp sponge and neutral detergent.
Replacing the glass panels:
•
Replace the panes in the opposite order
to which they were removed.
•
Reposition the internal glass panel, taking
care to centre and insert the 4 pins
attached to the glass into their slots in the
oven door by applying a slight pressure.
101