Smeg SC170-8 Manual page 45

Instructions for the user
11.2 Removing the door
11.2.1 With pins
Open the door completely.
Insert two pins into the holes indicated A
in the two hinges towards the back of
them until they engage.
Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that the grooved sections C are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
99