In Pizza Models; Setting The Assisted Cleaning Cycle - Smeg SC112-8 Manual

IN PIZZA MODELS

• Remove any accessories. In order to
save energy, you are advised to
remove the pizza plate and put the
cover back in its slot.
• Place a tray on the base of the oven
as shown in the figure.
• Pour approximately 40 cl of water into
the tray. Make sure it does not
overflow out of the cavity.
• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Aim the spray towards the side
walls, roof, floor and deflector (the
coloured zone on the figure to the side
shows where the solution can be
sprayed).
Do not spray excessive amounts of the water and washing up liquid solution. We
recommend spraying approx. 20 times at the most.
• Close the door and set the assisted
cleaning cycle.

8.8.2 Setting the assisted cleaning cycle

The assisted cleaning cycle can be only be activated when the oven is cold. If it
is activated when the inside of the oven is still hot, the word STOP will appear on
the display.
118
Instructions for the user