Removing The Door - Smeg S106X-6 Instructions For Use Manual

Instructions for the User
12.5.3 Removing the self-cleaning liners
Remove all accessories from the inside of the oven and proceed as
follows:
1 Remove the side runners (fig.1);
2 Extract the side liners "F" and "G" (fig. 2);
3 Extract the back liner "A" after undoing the threaded ring-nut "C"
(fig. 2);
4 Replace the liners in their original positions.
1) 2)

12.6 Removing the door

12.6.1 Removing doors with mobile hinges
With the door completely open, lift the levers A until they touch the hinges
B and take hold of the two sides of the door with both hands close to the
hinges. Raise the door to an angle of about 45° and remove it. If the
hinges have not locked, repeat the operation, raising the levers A and
keeping the door slightly raised. To reassemble, fit the hinges B into their
grooves, then lower the door into place, ensuring that it remains fitted into
the grooves C.
59