Using The Hob - Smeg PV630N Instructions For Installation And Use Manual

5. USING THE HOB

Make sure that the fastening plates E,
the burners, the crowns and the pan
stands are assembled correctly.
The notches A of the flame-spreader
crowns must be inserted into the
housings B of the burner. The holes C
in the burner should be slid over the
igniters and thermocouples D on the
hob.
5.1 Positioning the pan stands
The pan stands are provided unassembled on the hob. There are three types of
pan stands the installer must be familiar with in order to position them correctly.
Resting pan stand
(4-burner hob only)
36
Instructions for the user
C
D
Central pan stand
(5-burner hob only)
A
B
E
Support pan stand