Table of Contents
Advertisement
Instructions for the user
Position the support pan stand on the side burners, centring the fastening pins
(1) and (2) and then resting it on the hob.
When properly positioned, the legs of the pan stands must not be suspended
above the hob but should rest on top of it.
Then position the central pan stand (5-burner model) or the resting pan stand
(4-burner model) so that the dent rests on the supporting bar of the support pan
stand as shown in the figure.
Make sure that the pan stands are simply centred on their respective burners,
without forcing the burners to be raised or tilted. If they are, repeat the
positioning procedure.
If you find that a pan is particularly unstable, make sure that the pan stands
have not been positioned incorrectly.
38
Advertisement
Table of Contents
