Table of Contents
Advertisement
Adtran
Features
The features of the SDG-8610 include the following:
1G LAN interface (RJ-45)
l
1G WAN 1 interface (RJ-45)
l
WAN 2 interface (SFP cage)
l
This quick start describes how to install and connect to the device.
Installing the SDG-8610 Gigabit Router
l
Understanding the Status LEDs
l
Logging Into the SDG-8610
l
Product Specifications
l
Safety and Regulatory
l
Installing the SDG-8610 Gigabit Router
NOTE
Refer to the national, state and local electrical codes for the requirements for power, grounding,
wiring, and installation methods.
Package Contents
Adtran's SDG-8610 Wi-Fi 6 Gigabit Router
l
12V DC power adapter
l
Ethernet cable
l
SDG 8610 Quick Install Guide
l
CAUTION!
The product is intended for indoor use only. Ethernet and attached equipment are intended for use
within the same building with equipotential bonding, and not intended to be placed in separate
buildings or structures. Failure to deploy as described could result in permanent damage from
lightning or other electrical events and voids the warranty. Furthermore, all connections from
outside of the building must be disconnected prior to use.
Prior to Installation
Before installing the equipment, inspect the device. If damage has occurred during shipping, file a claim with the carrier,
and then contact Adtran Customer Support. For more information, refer to the product warranty available online at
https://adtran/wp_support_warranty.
Required Tools
No special tools are required for installing the SDG-8610.
Mounting Options
There are two options to install the SDG-8610: desktop and wall mount. Be sure to route and secure the cables in a
manner that will prevent damage. These options are described below.
Desktop Installation
The SDG-8610 can be placed on a desk or
meters) between the device and household appliances to reduce interference.
6SDG8610-13A
table. Table 1
shows the recommended minimum distance (in feet and
Package Contents
2
Advertisement
Table of Contents
