Table of Contents
Advertisement
TDP-ET20 DVD playback
About
The
described under that heading.
You can use this function with DVD video discs.
You can use this function with Video CDs.
You can use this function with Audio CDs and CD-R/RW discs.
Setup the DVD player.
You can setup the DVD player setting.
(1) Press [DVD SETUP] key on the remote control when DVD input is selected.
DVD setup menu will appear.
(3) In DVD setup menu, there are 2 pages. One is SYSTEM SETUP page and the other
is LANGUAGE SETUP page. Press
select each setup item.
(4) To exit from DVD setup menu, press
SETUP] key again.
PASSWORD (For Parental control)
Unlock the password lock
To change parental level or password, it is required to enter password (4 digit security
code) for unlocking.
(1) Select the PASSWORD in SYSTEM SETUP page and press
(2) Press number key to input current password and press
been set yet after you purchase this projector, it is '0000').
(3) If correct password is entered,
tered password is incorrect. Please enter the correct password again.
Enter new password
New password can be set to replace the default password.
(1) Select PASSWORD in SYSTEM SETUP page and press
(2) Please make sure
password lock.
(3) Press number button to input new password and press
this number.
If you forget the password, you can erase your current password by entering password as
'1048'.
icons on the heading bar show the playable discs for the function
will appear. If
is displayed. If
31
key to select page and press
key to select EXIT SETUP or [DVD
key(If the password has not
is still displayed, it means en-
or
is displayed, it is required to unlock the
key. Be sure to remember
key to
or
key.
key.
Advertisement
Table of Contents
