9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A Phone: (949) 583-3000 WARNING: Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to USA only operate the equipment. Notice: This Class B digital apparatus complies with Canadian ICES-003.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
Page 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) 10. Lightning storms 12. Do not place the product vertically For added protection for this product during storm, or when it is Do not use the product in the left unattended and unused for upright position to project the long periods of time, unplug it from pictures at the ceiling, or any other the wall outlet.
IMPORTANT SAFETY INSTRUCTIONS (Continued) 19. Replacement Parts 22. Do not use the product in a closed installation state. When replacement parts are required, be sure the service Do not place the product in a box technician has used replacement or in any other closed installation parts specified by the state.
Retain this information for future reference. EXEMPTION CLAUSES • Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, operation, theft or mischief by third parties, other accidents, or use under abnormal conditions including erroneous or improper operation and other problems.
Preparations Checking the package contents Please make sure that the following items are included in the box, along with the main unit. If any item is missing, please contact the store immediately where you purchased the product. (1) Remote control (7) Carrying bag (2) R6 (SIZE AA) batteries for remote (8) Mouse remote control set...
Names of each part on the control panel and remote control Control panel Remote Control (10) (11) (13) Name : Main Function (1) ENTER button : Accepts the selected mode. (2) MENU button : Displays menus. p.28 (3) SET UP button : Sets up image and mode.
Preparing and using the remote control Loading dry-cell batteries Operating the remote into the remote control control q Remove the battery cover. Point the remote control toward the projector’s infrared remote sensor, and press a button on the remote control. •...
Connection Before connection • Read the owner’s manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.39 • Turn off the power of both devices before connecting. •...
Turning the power on and off (Continued) Notes • The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the start-up screen not to appear via the Display setting menu p.30 •...
Basic operations (Continued) Projector placement angle adjustments The placement angle and the height of the projected image can be adjusted by the foot adjuster. q Lift up the front of the projector to the desired angle, then press the foot adjuster release button. The foot adjuster extends.
Using handy features (Continued) Manual adjustments and settings The menu items of the Set up menu vary depending on the input type, as shown in the table below. Use the buttons to adjust the items in the table below, then press the RETURN button when you are finished.
Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons on the control panel (main unit side) and remote control. p.16 How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display.
Using the menu (Continued) The display setting menu Use this menu to set screen display-related items. Description Item Screen size (Full): Display with 1024 × 768 dot resolution (Thru): Display with sampling resolution (for computer input) (Wide): Wide-screen display (for Video, S-video, and Y/P Select one of the languages below to use for displaying the menu and messages Language : Enter setting mode]...
If this happens, replace it with a new one. WARNING • If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealership when the lamp has to be exchanged.
Lamp replacement (Continued) Unplug power cord. Wait until lamp is sufficiently cooled. Wait for at least 1 hour. Remove the lamp cover. Loosen the 1 screw, then pull up to the direc- tion of the arrow with your fingers as shown to remove the lamp cover.
Others Trouble indications The indicator lights inform you of internal abnormalities. No power ⇒ Problem with projector • Unplug the power cord, and contact your dealer. ⇒ The lamp cover is not properly attached. • Unplug the power cord, and reattach the lamp cover. (Off) Lamp went out during use, or won’t come on ⇒...
Specifications List of general specifications Item Specification Consumption Power 300 W Weight 2.8 kg External Dimensions 298 × 101.4 × 275.4 mm (W × H × D) (including protruding parts) Cabinet material* PC+ABS resin and ABS resin Conditions for usage environment Temp: 5°C to 35°C; relative humidity: 30% to 70% Display pixels 1 chip DMD™...