Table of Contents
Advertisement
Electrical connection
If the mains connection cable is
supplied with a plug, connect the
combination steam oven to the
electrical supply using a suitable
electrical socket. This makes it easier to
perform servicing work. The socket
must be easily accessible after the
combination steam oven has been
installed.
Risk of damage from incorrect
connection.
Installation, repairs and other work by
unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorised work.
Miele cannot be held liable for
damage or injury caused by the lack
of or inadequacy of an on-site
earthing system (e.g. electric shock).
If the plug is removed from the mains
connection cable or if the mains
connection cable is supplied without
a plug, the combination steam oven
must be connected to the electrical
supply by a qualified electrician.
If the socket is no longer accessible,
or if a hard-wired connection is
installed, an additional means of
disconnection must be provided for
all poles. A suitable means of
disconnection would include
switches with an all-pole contact gap
of at least 3 mm. These include
circuit breakers, fuses and
contactors. The required connection
data is provided on the data plate.
Please ensure that these details
match the electrical supply.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.
The electrical installation must comply
with BS 7671 requirements.
For safety reasons, we recommend
using a type residual current device
(RCD) in the relevant electrical
installation for connecting the
combination steam oven.
These operating instructions and the
data plate indicate the nominal power
consumption and the appropriate fuse
rating. Compare this information with
the data of the on-site electrical
connection.
If in any doubt, consult a qualified
electrician.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronised with the mains power
supply (e.g. island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply
system complies with the specifications
of EN 50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronised with
the mains power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the current
version of BS OHSAS 18001–2 ISO
45001.
Installation
175
Advertisement
Table of Contents
