Table of Contents
Advertisement
Malfunction due to missing floor
filter.
If the floor filter is missing, food
deposits can get into the drain. The
water cannot be pumped away.
Before each cooking programme,
check that the filter in the floor of the
oven compartment is correctly fitted.
Switch the combination steam oven
on.
The main menu will appear.
If you want to cook using a steam
operating mode or bursts of steam, fill
the water container and insert it into
the appliance.
Distilled or carbonated water or other
liquids could damage the
combination steam oven.
Only use cold, fresh drinking water
(below 20 °C).
Place the food in the oven
compartment.
Select
Oven functions
Select the relevant operating mode.
The operating mode and recommended
values for temperature and moisture (if
applicable) appear.
Change the recommended values if
necessary.
.
The recommended values will be
automatically accepted within a few
seconds. You can change the
temperature and moisture level later
by selecting the temperature or
moisture indicator.
Confirm with OK.
The required and the actual temperature
will appear and the heating-up phase
will begin.
You will see the temperature increasing.
A buzzer will sound when the set
temperature is reached for the first time.
After the cooking process, select
.
Finish
Risk of injury caused by hot
steam.
When using a cooking process
involving steam, a lot of hot steam
can escape if the door is opened. The
steam can cause burns.
Step back and wait until the hot
steam has dissipated.
Take the food out of the oven
compartment.
Risk of injury caused by hot
surfaces.
The combination steam oven gets
hot during operation. You can burn
yourself on the door glass.
Wear oven gloves when closing the
hot door.
Operation
61
Advertisement
Table of Contents
