Table of Contents
Advertisement
Mounting Holes and Slots
Rubber feet slot (one in each corner)
Wall-mounting hole
10
Wall-mounting hole
Wall-hanging slots
SIM card sockets cover tab with screw
Basic Connections
1
LAN/PoE
Optional Power
Connection
1. Insert one end of an Ethernet cable into the LAN/PoE port on the device.
2. Insert the other end of the Ethernet cable into the PoE LAN port on your FortiGate
appliance. Ensure that FortiGate and FortiExtender are on the same subnet.
3. Optionally, if you are not using PoE, connect the device to a power outlet using a
power adapter.
Warning:
You must provide adequate grounding to the PoE injector of the FortiExtender unit, if
required, in compliance with your local electrical code or regulations.
This device complies with IEEE 802.3at PoE specification. Do not use a PoE injector that
is not IEEE 802.3at compliant as it might damage your device.
Internet
11
Advertisement
Table of Contents
