Basic Connections - Fortinet FortiExtender 200F Quick Start Manual

Basic Connections

1
WAN
Power
Connection
10
2
After you have connected the FEX-200F network interfaces, the
device automatically attempts to obtain an IP address from a
DHCP server.
If you do not use DHCP, you can configure a static IP address.
To configure a static IP address:
Internet
1. Use an Ethernet cable to connect one of the LAN ports in the
2. Configure the computer to be on the same subnet as the FEX-
3. Open your web browser and point to the default FEX-200F
4. In both the username and password fields, type admin and
5. Go to Network Configuration.
6. For address mode, select Static.
7. Specify the IP address, netmask, and gateway; and then click
IP Configuration
back of the FEX-200F to the Ethernet port of your computer.
200F by changing its IP address to 192.168.200.100 and the
netmask to 255.255.255.0.
web GUI address: http://192.168.200.99
press Enter.
APPLY.
11