Advertisement
Basic Connections
1
LAN/PoE
Optional Power
1. Insert one end of an Ethernet cable into the LAN 4/PoE PD port on the device.
2. Insert the other end of the Ethernet cable into the PoE LAN port of your FortiGate
appliance, or to a WAN port of your FortiGate through a power injector. Ensure that the
FortiGate interface provides DHCP server service to issue an IP address to FortiExtender
when connected to LAN Port 4 of FortiExtender.
3. Optionally, if you are not using PoE, connect the device to a power outlet using a
power adapter.
Warning:
You must provide adequate grounding to the PoE injector of the FortiExtender unit, if
required, in compliance with your local electrical code or regulations.
This device complies with IEEE 802.3at PoE specification. Do not use a PoE injector that
is not IEEE 802.3at compliant as it might damage your device.
FortiExtender-212F-QuickStart.indd 13
FortiExtender-212F-QuickStart.indd 13
Connection
Internet
13
7/28/2021 3:22:38 PM
7/28/2021 3:22:38 PM
Advertisement
