Table of Contents
Advertisement
English
Alarm warnings
11.2
Problems - Causes - Solutions
The following table indicates the possible error or alarm causes which may lead to a partial or total shutdown of
the appliance.
Error code
E5
Error 5:
COD_WATER_CIRCUIT_FAILURE
Indicates a fault regarding the water circuit for hot water/coffee:
the pump has completed the three circuit priming attempts
E6
Error 6:
COD_EV_DRV_FAILURE
Indicates that one or more solenoid valves are in short-circuit and therefore they cannot be used
E8
Error 8:
COD_STEAM_CIRCUIT_FAILURE
Indicates a fault regarding the Steam water circuit:
the pump has completed the three circuit priming attempts
E10
Error 10:
COD_NTC_C_SHORT_FAILURE
Indicates that the coffee boiler NTC temperature sensor is in short-circuit
E11
Error 11:
COD_NTC_C_OPEN_FAILURE
Indicates that the coffee boiler NTC temperature sensor is not connected
E12
Error 12:
COD_NTC_S_OPEN_FAILURE
Indicates that the steam boiler NTC temperature sensor is not connected
E13
Error 13:
COD_NTC_S_SHORT_FAILURE
Indicates that the steam boiler NTC temperature sensor is in short-circuit
E14
Error 14:
COD_HC_TIMEOUT_FAIL
Indicates that the coffee boiler supply is not connected
E15
Error 15:
COD_HS_TIMEOUT_FAIL
Indicates that the steam boiler supply is not connected
E19
Error 19:
COD_Z_CROSSING_FAILURE
E20
Error 20:
COD_HC_OVER_TEMP_FAILURE
Indicates that the coffee boiler is overheated
E21
Error 21:
COD_HS_OVER_TEMP_FAILURE
Indicates that the steam boiler is overheated
76
The machine requires you to close the capsule tray.
The selected operation requires milk dispensing.
Ensure that the Cappuccinatore is correctly and fully assembled.
Insert the Cappuccinatore in the machine as specified in the manual.
Turn off the machine.
Turn it back on after 30 sec.
Try this 2 or 3 times.
If this warning appears again, contact the service provider and indicate the code shown in the
display.
How to reset the message
Description
Advertisement
Table of Contents
