Table of Contents
Advertisement
TUNING
MODE
Memory presettings
Manual memory presetting
Have you completed the steps (on page 18) of
"Basic Operating Procedure" ?
You can program 30 AM/FM
radio broadcast stations into memory,
80 that any desired station may be selected by simply touching one
or two buttons. (See pages 21 ~ 23.)
1 Press the "TUNER" button.
2 Press the "FM" or "AM" button.
Before presetting AM broadcast stations, press to select the
appropriate frequency step for your locality.
(Reter to item [87] on page 13.)
3 Select the desired tuning mode, "AUTO" or
"MANUAL".
4 Turn the tuning control so as to tune to the
desired broadcast.
in "AUTO" mode, the next station, higher or lower in broad-
cast frequency, will be automatically tuned in.
steps
2 through 6.
5 Press the memory button momentarily.
(The memory indicator will illuminate.)
If the memory button is pressed and held until the frequency
begins to change, the automatic
memory presetting (See
page 22.) is activated. To stop the automatic memory preset-
ting, once again press the memory button. Then begin again
from step 4.
To cancel the memory function, press the memory button
again.
Select the desired "CHANNEL".
To designate channels 1—9:
Press the appropriate (1—9) preset-tuning button.
To designate channels 10-30:
@® Press the button for the most significant digit (1, 2 or 3).
@ Press the button for the least significant digit (1 —0) within
2 seconds after pressing the first button.
If the interval between pressing the first button and pressing
the second button is more than about 2 seconds, the setting
may not be made correctly. If this happens, make the setting
once again (following step 5).
Repeat steps 2 through 6 to make additional
memory presettings; for later reference, note
the presettings in the station memory file on
page 23.
In "MANUAL"
mode, the frequency will change, using the
smallest step available, only as the tuning control is being
turned. This will allow you to tune in all of the broadcast
frequencies available in that band.
Note:
{f a new broadcast station is preset into a channel, the broadcast
Station
which
was
previously
entered
in that channel
will be
automatically erased.
—21—
Advertisement
Table of Contents
