Table of Contents
Advertisement
Front Panel Controls and Functions
pennrnen
@
62
—PEQ/TONE~—
SURROUND
*PEQMODE
fSpo.ay
M___
«TONE MODE
PRESET *MANUAL
[>HALL
123 FLAT
=FIXED
[>cLUB
[> staolum
PCP
COPING
¢
(EEG
18 Ems
beat TIME
[A AA Wa WA []RB oe)
erenoeenornne mrcvag
Display section
61] FM stereo indicator (STEREO)
Audio Input selector/frequency display
This indicator automatically illuminates when an FM stereo
(INPUT SELECTOR/FREQUENCY)
ha
is being received.
Displays the selected source or broadcast frequency.
jote:
It will not illuminate if the FM mode selector is set to the
;
ae
Digital indicator
This indicator will illuminate when listening to compact discs
or digital audio tapes through optical-fiber cable connections.
62] Spectrum analysis/parametric EQ level display
(SPECTRUM ANALYZERIPARAMETRIC EQ)
[70] Tape indicator (TAPE)
This display shows the spectrum analysis level ('Bar-type
This indicator will illuminate when the tape-monitor switch is
display" or "Dot display") or equalization level.
pressed.
[71] VCR display (VCR)
63] Quartz-lock indicator (QUARTZ LOCK)
This display shows the VCR to be used.
This indicator illuminates when the unit is tuned precisely to a
broadcast station.
[72] Loudness indicator (LOUDNESS)
This indicator will illuminate when the loudness switch is
pressed.
Channel display
This display shows the channel number selected by one of the
73) Muting indicator (MUTING)
seconds during memory scan operation.
{f4] Center mode indicators
Band indicators (AM/FM)
These indicators show the center mode selected by the center
Indicates the selected band.
mode. select button:
[75| Rearicenter level indicator
Memory indicator (MEMORY)
Displays the level adjusted by the center speaker level
This indicator illuminates when the memory button is pressed.
adjustment button or rear speaker level adjustment button.
Test signal Indicator (ll TEST)
7] Memory scan indicator (M. SCAN)
This indicator illuminates when the test signal transmission
This indicator illuminates when the memory scan button is
button is pressed in the Dolby Pro-Logic Surround mode and
pressed.
the Dolby 3 stereo mode.
—4—
Advertisement
Table of Contents
