Table of Contents
Advertisement
Front Panel Controls and Functions
Amplifier section
Speaker selectors (SPEAKERS)
Display mode select button
('DISPLAY MODE -DEMO)
Equalization preset buttons
(MANUAL PRESET)
Tape-monitor switch (TAPE MONITOR)
Press this button to listen to a tape or an audio source con-
nected to the "TAPE" terminals.
To listen to some other source, press this button once again
(so that the indicator is switched OFF).
Volume control (VOLUME)
Headphone jack (PHONES)
=<"
82] Input selector buttons
[33] Loudness switch (LOUDNESS)
Set
to the
"ON"
position
(the loudness
indicator
will i!-
luminate); when listening to music at low volume. Auditory
Perception of sound in the low frequency range falls off at low
volume, but when the switch is in this position, this deficiency
is compensated for, so that the full impact of the musical
performance can be enjoyed.
4] Dolby surround Input balance contro!
(SURROUND INPUT BALANCE)
This control
is used
to minimize
dialogue
leakage
in the
surround
channel
thereby optimizing the Dotby surround
decoding operation.
[35] Balance control (BALANCE)
"VCR 3" terminals (VCR 3)
These terminals are used for tape-to-tape recording if a third
VCR is connected here.
Advertisement
Table of Contents
