Storm Control; Global Setting - Planet IGS-4215-16T2S User Manual

The page includes the following fields:
Object
• Queue ID
• Rate Limit (Kbps)

4.12.5 Storm Control

Storm control for the switch is configured on this page.
There is an unknown unicast storm rate control, unknown multicast storm rate control, and a broadcast storm rate control.
These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.

4.12.5.1 Global Setting

The Storm Control Global Setting and Information screens in
The page includes the following fields:
Object
• Unit
• Preamble & IFG
Buttons
: Click to apply changes.
Description
Displays the current queue ID.
Displays the current rate limit.
Figure 4-12-23: Storm Control Global Setting Page Screenshot
Description
Controls the unit of measure for the storm control rate as "pps" or "bps". The
default value is "bps".
Set the excluded or included interframe gap.
Figure 4-12-24: Storm Control Global Information Page Screenshot
User's Manual of IGS-4215-16T2S
Figure 4-12-23 and Figure 4-12-24
239
appear.