Table of Contents
Advertisement
Users Manual
App Familiarization
This section explains how to use the App menu.
FlukeHART Menu
Use the App menu to view the Device or Modem that is connected to the App,
connect to a new Device or Modem, save the Device configurations, change
App settings, show App registration information, and more. To use the App
menu, the Device connectivity indicator must be visible. See
number 6.
To open the App Menu, Tap
To exit App submenus:
1. Tap
.
2. Select Device Explorer.
The App submenus are explained in the next sections.
New Device
1. Select New Device to connect to a new device.
2. Select Done in the message box that opens.
The App automatically identifies and communicates with the new Device,
and the status of the communication shows on the status bar.
3. Exit the App submenu.
Device Explorer
Select Device Explorer to exit the App menu and view Device menus.
Figure
1
and Table
The sample menu below will not show on the screen until after you connect
the Product. See
.
3
show a sample menu and how to use it.
Note
Use the
Product.
6
Device Explorer
Advertisement
Table of Contents
