Fluke FiberInspector Pro FI-3000 User Manual page 31

Electromagnetic Compatibility (EMC)
International
Group 1: Equipment has intentionally generated and/or uses conductively-
coupled radio frequency energy that is necessary for the internal function of
the equipment itself.
Class A: Equipment is suitable for use in all establishments other than
domestic and those directly connected to a low-voltage power supply
network that supplies buildings used for domestic purposes. There may be
potential difficulties in ensuring electromagnetic compatibility in other
environments due to conducted and radiated disturbances.
Caution: This equipment is not intended for use in residential environments
and may not provide adequate protection to radio reception in such
environments.
Korea (KCC)
Class A: Equipment meets requirements for industrial electromagnetic wave
equipment and the seller or user should take notice of it. This equipment is
intended for use in business environments and not to be used in homes.
USA (FCC)
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided
as follows: Hereby, Fluke Networks declares that the radio equipment contained in this
Product is in compliance with Directive 2014/53/EU. The full text of the EU declaration is
available at the following internet address: https://www.fluke.com/red.
IEC 61326-1: Basic Electromagnetic Environment;
CISPR 11: Group 1, Class A
Class A Equipment (Industrial Broadcasting & Communication
Equipment)
47 CFR 15 Subpart C Sections 15.207, 15.209, 15.249
27