Fluke FiberInspector Pro FI-3000 User Manual page 16

Item Description
 Menu button
 Project bar
 Project settings
Image of
D
endface
Individual
E
endface
WiFi connection
F
indicator
G Focus toolbar
Quick access
H
toolbar
Manual focus
I
slider bar
J Battery status
12
Table 4. Live View Screen
Opens the main menu. See
Shows the project in use.
Shows the Cable ID, Test Limit, and Fiber End
Type settings.
Shows all of the fiber endfaces.
The image will be too dark to analyze if you
use a UPC tip on the probe to inspect an APC
endface.
For MPO endfaces, shows one of the fiber
endfaces.
Shows the WiFi connection status.
Red: The Probe is not connected to a mobile
device.
Green: The Probe is connected to a mobile
device.
Orange: The image is paused. Push
to live mode.
Adjusts the focus and mode of the image. See
Focus Toolbar.
Contains frequently used tools. See
Toolbar.
Touch and slide the bar up or down to increase
or decrease the focal distance to manually focus
the image. To manually focus the image in fine
increments, use
Shows the battery status of the Probe.
Function
Main
Note
E C
or .
Menu.
G
to return
Quick Access