Intended Use - ResMed Power Station II-V2 User Manual

English

Intended use

The ResMed Power Station II-V2 (RPSII-V2) is an external lithium-ion battery pack that
provides power when mains power is unavailable.
The RPSII battery coupler kit allows the simultaneous connection of two RPSII-V2
battery packs to power a ResMed therapy device. It may also be used to
simultaneously charge two battery packs simultaneously.
The Air10 power supply unit (PSU) adaptor is intended to connect the Air10 PSU to the
battery pack for charging. The DC cable is intended to connect the battery pack to a
therapy device for discharging.
Read the entire guide before using the battery pack. Refer to the device user guides
for intended patients/medical conditions, uses, the environment where used, and
contraindications associated with CPAP , bilevel, and ventilation therapy.
At a glance
Refer to illustration A.
The RPSII-V2 system comprises the
following components:
1. Battery pack
2. Air10 power supply unit adaptor
3. Carry bag
Optional accessory:
7 . RPSII Battery coupler kit (packed with Velcro
Compatible devices and accessories
A range of devices, power supply units, and DC cables are available for use with the
RPSII-V2.
Refer to the following lists on www.resmed.com/downloads/devices:
• Battery / Device Compatibility List for compatible devices
• Power Supply Unit / Device Compatibility List for compatible power supply units
If you do not have internet access, contact your ResMed representative.
For more information on setting up your devices, see your device user guide.
DC output voltage and DC cables
DC cable part number
37343 (Air10 DC cable)
37343 (Air10 DC cable)
37343 (Air10 DC cable)
24959 (Stellar DC cable)
24981 (Stellar 0.5m DC cable)
Available separately:
4. 90W AC power supply unit
5. AC or DC power cord
6. DC cable
strap)
™
24V For use with
AirSense
™

AirCurve
™

Lumis 100/150/HFT Series
™

Stellar 100/130/150 Series
™

10 Series
10 Series
English 1