Electromagnetic Compatibility - ResMed Power Station II-V2 User Manual

Weight
Recharge time
Run time
AC power supply
Input range
Output current (rated)
DC converter
Input range
Environmental conditions
Operating temperature:
Charging
Discharging
Operating humidity
Transport / storage temperature:
Battery pack / coupler kit
PSU adaptor / DC cables
Transport / storage humidity
Operating / storage air pressure
Aircraft use
Product meets the Federal Aviation Administration (FAA) requirements (RTCA/D0-160,
section 21, category M) for all phases of air travel.

Electromagnetic compatibility

Product complies with all applicable electromagnetic compatibility requirements (EMC)
according to IEC 60601-1-2, for residential, commercial, and light industry environments.
Information regarding the electromagnetic emissions and immunity of these ResMed
devices can be found on www.resmed.com/downloads/devices
IEC 60601-1 classification
Class II (double insulation) and / or Internally Powered Equipment, IP21 (IP20 while
charging), Continuous Operation (from mains), Limited Operation (from battery),
Equipment not suitable for use in the presence of a flammable anaesthetic mixture with
air or with oxygen or nitrous oxide.
Using 15 cm H O (IPAP), 5 cm H
1
2
when using heated humidification and heated tubing.
Note: The manufacturer reserves the right to change these specifications without
notice.
2.0 lb (0.9 kg)
System: 5.1 lb (2.3 kg)
< 4 hrs at full level
> 8 hrs at average device settings
For more information, see the Battery / Device
Compatibility List on www.resmed.com/downloads/
devices
100–240V, 50–60Hz, 1.0-1.5A
110V, 400Hz (nominal for aircraft use)
3.75 A
12V / 24V, 13A / 6.5A
41°F to +104°F (5°C to 40°C)
23°F to +104°F (-5°C to 40°C)
5–85% relative humidity, non-condensing
-4°F to +113°F (-20°C to +45°C)
-4°F to +140°F (-20°C to +60°C)
5–85% relative humidity, non-condensing
680 hPa to 1060 hPa
O (EPAP), and 15 BPM (Respiratory Rate). Not applicable to devices
2
1
English 7