Table of Contents
Advertisement
●
The alert tone is inhibited when you change to a channel without Emergency feature.
●
The alert tone is inhibited when you change to a channel with Emergency but no Fall Alert feature.
●
The current alert tone is inhibited and is replaced with a different alert tone when you change to a channel
with Emergency feature and a different Fall Alert configuration.
●
The alert tone continues when you change to a channel with Emergency and similar Fall Alert
configuration.
7.14.2
Testing Fall Alert
Prerequisites: Ensure that Fall Alert feature is configured in your radio.
Procedure:
1. Turn on the radio, and place it in a vertical position for at least 5 seconds.
2. Lay the radio down in a horizontal position.
Result:
The radio plays an alert tone and the display shows Man-Down.
Postrequisites: If Fall Alert is configured but the condition does not trigger the activation of the feature, send
the radio to a qualified technician.
7.14.3
Exiting Fall Alert
Procedure:
To exit Fall Alert mode, press Clr.
7.14.4
Reinitiating Fall Alert
Procedure:
To reinitiate Fall Alert after exiting Emergency Operation, perform one of the following actions:
●
Return the radio to a vertical position.
●
If motion sensitivity is enabled, shake the radio.
7.15
Automatic Registration Service
Automatic Registration Service (ARS) provides an automated data application registration for your radio.
When you turn on the radio, the device automatically registers with the server. Data applications within the
fixed network determine the presence of a device on the system and send data to the device.
The ARS consists of the following mode:
●
ARS Server Mode (Default mode)
●
ARS Non-server Mode
MN004476A01-AN
Chapter 7: Advanced Features
77
Advertisement
Table of Contents
