ZyXEL Communications V300-T1 User Manual page 87

Table 23 VoIP > SIP > SIP Settings
LABEL
SIP Local Port Enter the V300's listening port number, if your VoIP service provider gave you one.
SIP Server
Address
SIP Server
Port
REGISTER
Server
Address
REGISTER
Server Port
SIP Service
Domain
Send Caller ID Select this if you want to send identification when you make VoIP phone calls.
Voice Mail
Number
DNS SRV
Backup SIP
Server
1st / 2nd
Backup SIP
Server
SIP Service
Address
SIP Service
Port
Register
Service
Address
Register
Service Port
Authentication
User Name
Password
Apply
Advanced Setup
V300 User's Guide
DESCRIPTION
Otherwise, keep the default value.
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 32 printable English keyboard characters. It
does not matter whether the SIP server is a proxy, redirect or register server.
Enter the SIP server's listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP register server, if your VoIP
service provider gave you one. Otherwise, enter the same address you entered in
the SIP Server Address field. You can use up to 32 printable English keyboard
characters.
Enter the SIP register server's listening port number, if your VoIP service provider
gave you one. Otherwise, enter the same port number you entered in the SIP
Server Port field.
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 32 printable English keyboard characters.
Clear this if you do not want to send identification.
Enter the voicemail number associated with this SIP account.
Select this to use the DNS server(s) you configured in the Network > Ethernet >
Internet Connection screen.
Select the check box to have the V300 use the backup SIP server(s) you
configure. If the V300 cannot use the server you configured in the SIP Settings
section of this screen, it tries to use the backup server(s). It tries to use the 1st
Backup SIP Server and, if it cannot connect, then tries to use the 2nd Backup
SIP Server.
Enter the IP address or domain name of the backup SIP server provided by your
VoIP service provider. You can use up to 32 printable English keyboard
characters. It does not matter whether the SIP server is a proxy, redirect or
register server.
Enter the backup SIP server's listening port number, if your VoIP service provider
gave you one. Otherwise, keep the default value.
Enter the IP address or domain name of the backup SIP register server, if your
VoIP service provider gave you one. Otherwise, enter the same address you
entered in the SIP Service Address field for this backup server. You can use up to
32 printable English keyboard characters.
Enter the backup SIP register server's listening port number, if your VoIP service
provider gave you one. Otherwise, enter the same port number you entered in the
SIP Service Port field for this backup server.
Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 20 printable English keyboard characters.
Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 20 printable English keyboard characters.
Click this to save your changes.
Click this to edit the advanced settings for this SIP account. The Advanced SIP
Setup screen appears.
Chapter 10 SIP Account Setup
87