First And Second Dns Servers; The Pppoe Menu; Figure 49 Lcd Menu: Subnet Mask - Edit; Figure 50 Lcd Menu: First / Second Dns - ZyXEL Communications V300-T1 User Manual

Chapter 6 LCD Menus: Advanced

Figure 49 LCD Menu: Subnet Mask - Edit

4 Subnet Mask
0.0.0.0_
Use PHONEBOOK to clear the previously-saved settings if any. Enter the new subnet mask
and press

6.4.4 First and Second DNS Servers

Use these screens to enter the IP address(es) of DNS (Domain Name System) servers on your
network. Use 1st DNS for the primary (main) server, and use 2nd DNS if you have
information about a secondary (backup) server.
Select 1st DNS or 2nd DNS in the Advanced Setting > Static IP menu. A screen similar to
the following displays (this example uses the 1st DNS screen).

Figure 50 LCD Menu: First / Second DNS

5. 1st DNS:
0.0.0.0
If a DNS server is already configured, its IP address displays. Otherwise, no IP address
displays. Press
6.4.4.1 First / Second DNS - Edit
Press in the 1st DNS or 2nd DNS screen. A screen similar to the following displays (this
example uses the 1st DNS screen).

Figure 51 LCD Menu: First / Second DNS - Edit

5 1st DNS:
0.0.0.0_
Use PHONEBOOK to clear the previously-saved settings if any. Enter the new DNS server
IP address and press
screen.

6.5 The PPPoE Menu

Use this menu to configure your V300's PPPoE username and password, if it is a PPPoE
client. Enter your details exactly as your ISP or network administrator gave them to you.
Select Adv Setting > PPPoE. The following screen displays.

Figure 52 LCD Menu: PPPoE

1. PPPoE
On
58
to save the change. Alternatively, press
to edit the DNS server settings, or press
to save the change. Alternatively, press
to return to the previous screen.
to return to the previous screen.
to return to the previous
V300 User's Guide