Receiving A Call; Ending A Call; Changing The Volume; Muting A Call - ZyXEL Communications V300-T1 User Manual

Zyxel v300-t1: user guide
Hide thumbs Also See for V300-T1:
Table of Contents

Advertisement

Chapter 2 Hardware
Press the SPEAKER key.
• If you want to use a headset:
Press the HEADSET key.
2 Check that you can hear a dial tone.
3 Enter the number you want to call. If you have numbers stored in the V300's phone
book, you can use the navigator to select from the list of entries.
4 Press the yellow SEND key.
During the call:
• If you are using the headset or the speakerphone, you can switch to the handset by
lifting it off the hook.
• If you are using the handset or the speakerphone, you can switch to the headset by
pressing the HEADSET key.
• If you are using the handset or a headset, you can switch to the V300's speakerphone
by pressing the SPEAKER key.
Note that the call ends if you are using the speakerphone and press the SPEAKER key,
or if you are using the headset and press the HEADSET key.

2.2.2 Receiving a Call

When the phone rings, do one of the following:
• Pick up the handset to receive the call using the handset.
• Press the SPEAKER key to receive the call using the internal speakerphone.
• Press the HEADSET key to receive the call using an external headset.

2.2.3 Ending a Call

When you want to end a call, press the HANG UP key. Alternatively, do one of the following:
• If you are using the handset, replace it in the cradle.
• If you are using the internal speakerphone, press the SPEAKER key.
• If you are using an external headset, press the HEADSET key.

2.2.4 Changing the Volume

Use the VOLUME + key to increase the volume, and use the VOLUME - key to decrease it.
• When there is no line active on the V300, the volume keys control the ringing volume.
• When the handset is off hook, the keys control the handset's speaker volume.
• When the speakerphone is active, the keys control the speaker volume.
• When the headset is active, the keys control the headset's speaker (earpiece) volume.

2.2.5 Muting a Call

When you mute a call on the V300 you can hear the incoming signal (the sound from the other
end of the line) but you do not transmit a signal (the person on the other end of the line cannot
hear you). It does not matter whether you are using the handset, the internal speakerphone or
an external headset.
34
V300 User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V301l-t1V300V301

Table of Contents