The Advanced Setting Menu; The Reset Menu; System Restart; Figure 19 Lcd Menu: Reset - ZyXEL Communications V300-T1 User Manual

The following table describes the labels in this menu.

Table 9 LCD Menu: System Info

LABEL
IP Address
Subnet Mask
Gateway
1st DNS
2nd DNS
F/w Version

5.5 The Advanced Setting Menu

Use this menu to configure network and SIP account settings. See
information on the Advanced Setting menu.

5.6 The Reset Menu

Use this menu to restart the V300 or reset the V300 to the factory defaults. Press MENU >
Reset and then

Figure 19 LCD Menu: Reset

Menu Setting:
5. Reset

5.6.1 System Restart

Use this screen to restart the V300 without turning the power off.
1 Select RestartPhone.

Figure 20 LCD Menu: Reset: System Restart

5. Reset
1. RestartPhone
2 Press
the 2 key to return to the previous menu without restarting the V300.
V300 User's Guide
DESCRIPTION
This is the IP address currently assigned to the V300. This displays 0.0.0.0
if DHCP is disabled.
This is the subnet mask currently configured on the V300. This displays
0.0.0.0 if DHCP is disabled.
This is the IP address of the device on the network your V300 uses to
access the Internet. This displays 0.0.0.0 if DHCP is disabled.
This is the primary DNS (Domain Name System) server your V300 uses.
This displays 0.0.0.0 if DHCP is disabled.
This is the secondary (backup) DNS server your V300 uses. This displays
0.0.0.0 if DHCP is disabled.
This is the version number of the firmware currently running on the V300.
You can upload new firmware using the web configurator.
to access the Reset menu. The following screen displays.
.and the following screen displays. Press the 1 key to restart the V300 or press
Chapter 5 LCD Menus: Basic Settings
Chapter 6 on page 49 for
47