Onchip Pci Device - AMD 780G User Manual

Primary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33 and
Ultra DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your
IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of
the optimal number of block read/writes per sector the drive can support. The settings are: Enabled,
Disabled.
Onchip SATA Controller
This item allows you to control Serial ATA controller.
3-7-3

Onchip PCI Device

Onboard PCIE Lan Device
Onboard PCI LAN BootRom
HD Audio
Onchip USB Controller
USB EHCI Controller
USB Keyboard Support
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Onboard LAN device
This option allows you to control the onboard LAN device.
HD Audio
This item allows you to decide to enable/disable the chipset family to support HD Audio.
The settings are: Enabled, Disabled.
Onchip USB Controller System
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB peripherals. The settings are: Enabled, Disabled.
USB Device Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB device. The settings are: Enabled, Disabled.
Phoenix – AwardBIOS CMOS Setup Utility
OnChip PCI Device
Auto
Enabled
Enabled
Enabled
F6:Fail-safe Defaults
(Enabled)
Enabled
Enabled
F7:Optimized Defaults
30
Item Help
Menu Level >>