Routingtable - Zonet ZSR2104WE User Manual

4.10. Routing Table
On the Routing Table screen, you can set the routing mode and settings of the
Router. Gateway mode is recommended for most users.
Operating Mode
Dynamic Routing (RIP)
The default setting is Gateway.
Choose the correct working mode. Keep the default
setting, Gateway, if the Router is hosting your
network's connection to the Internet (Gateway mode
is recommended for most users). Select Router if
the Router exists on a network with other routers.
Note: This feature is not available in Gateway
mode.
The default setting is Disable.
Dynamic Routing enables the Router to
automatically adjust to physical changes in the
network's layout and exchange routing tables with
other routers. The Router determines the network
packets' route based on the fewest number of hops
between the source and destination.
To enable the Dynamic Routing feature, select
Enable. To disable the Dynamic Routing feature for
all data transmissions, keep the default setting,
Disable.
39