Dhcpserver - Zonet ZSR2104WE User Manual

4.4. DHCP Server
The DHCP Server screen allows you to configure the settings for the Router's
Dynamic Host Configuration Protocol (DHCP) server function. The Router can be
used as a DHCP server for your network. A DHCP server automatically assigns
an IP address to each computer on your network. If you choose to enable the
Router's DHCP server option, you must configure your entire network PCs to
connect to a DHCP server, the Router.
If you disable the Router's DHCP server function, you must configure the IP
Address, Subnet Mask, and DNS for each network computer (note that each IP
Address must be unique).
DHCP Server: Select the Enable option to enable the Router's DHCP server
option. If you already have a DHCP server on your network or you do not want a
DHCP server, then select Disable from the options.
Starting IP Address: Enter a numerical value for the DHCP server to start with
when issuing IP addresses. Because the Router's default IP address is
192.168.1.1, the Starting IP Address must be 192.168.1.2 or greater, but smaller
23