Zonet ZSR2104WE User Manual page 21

For Windows 2000 and XP:
1. Click the Star button, and select Run.
2. Type cmd in the field provided, and press the OK key.
3. At the command prompt, run ipconfig /all, and look at your adapter's physical
address.
4. Write down your adapter's MAC address.
To clone your network adapter's MAC address onto the Router and avoid calling
your ISP to change the registered MAC address, follow these instructions.
1. Select Enable.
2. Enter your adapter's MAC address in the MAC Address field.
3. Click the Apply button
To disable MAC address cloning, keep the default setting, Disable.
Remote Management:
This feature allows you to manage your Router from a remote location, via the
Internet. To disable this feature, keep the default setting, Disable. To enable this
feature, select
Enable, and use the specified port ( default is 8080) on your PC to remotely
manage the Router. You Must also change the Router's default password to one
of your own, if you haven't already. A unique password will increase security.
To remotely manage the Router, enter http://xxx.xxx.xxx.xxx:8080 (the x's
represent the Router's Internet IP address, and 8080 represents the specified
port) in your web browser's address field. You will be asked for the Router's
password. After successfully entering the password, you will be able to access
the Router's web-based utility.
Note: If the Remote Management feature is enabled, anyone who knows the
Router's Internet IP address and password will be able to alter the Router's
settings.
MTU: MTU is the Maximum Transmission Unit. It specifies the largest packet size
permitted for Internet transmission. Keep the default setting, Auto, to have the
Router select the best MTU for your Internet connection, To specify a MTU size,
select Manual, and enter the value desired (default is 1400). You should leave
this value in the 1200 to 1500 range.
Traffic Log: The Router can keep logs of all incoming or outgoing traffic for your
Internet connection. This feature is disabled by default. To keep activity logs,
select Enable.
To keep a permanent record of activity logs as a file on your PC's hard drive, Log
21